MAKE. SURE. that. your. machine. is.
unplugged. during. all. service. proce-
dures!. If. this. warning. is. ignored,. seri-
ous.personal.injury.may.occur.
The. indexable. inserts. are. very. sharp.
and.can.easily.cut.your.hands..ALWAYS.
use.caution.when.handling.these.parts.
to.reduce.risk.of.personal.injury.
Figure.26.
Insert rotating sequence.
-31-
Model W1876 (For Machines Mfd. Since 7/20)
SE
RV
IC
E
SERVICE
General
The spiral-style cutterhead is equipped with 2-sided
indexable inserts. Each insert can be removed, rotated,
and re-installed to use either of its two cutting edges. If
one cutting edge becomes dull or damaged, simply rotate
it 90° (see
Figure.26
) to use a sharp cutting edge.
The inserts have a reference dot on one corner. The
position of the reference dot on installed inserts can
be used to track which edges are sharp/unused and
which edges are dull or damaged. Replace inserts once
the reference dot has been rotated back to its original
position.
Rotating/Replacing.
Cutterhead.Inserts
Item(s).Needed.
Qty
Indexable HSS Inserts 14 x 14 x 2mm ........... As Needed
Torx Head Screws T-25 #10-32 x
1
⁄
2
" ............. As Needed
T-Handle Torx Driver T-25 .....................................1
Hex Wrench 4mm ...............................................1
Light Machine Oil ................................... As Needed
Clean Shop Rags ..................................... As Needed
To.rotate.or.replace.cutterhead.insert,.do.these.steps:
1.
DISCONNECT MACHINE FROM POWER!
2.
Loosen (2) button head cap screws securing
cutterhead guard to jointer base, then remove
cutterhead guard.
3.
Insert included Torx driver in the cutterhead rotation
guide on front of jointer, and rotate cutterhead
as needed to make inserts accessible for rotation/
removal.
This section covers the most common service adjustments
or procedures that may need to be made during the life
of your machine.
If you require additional machine service not included
in this section, please contact Woodstock International
Technical Support at (360) 734-3482 or send e-mail to:
Reference Dot
Содержание W1876
Страница 52: ......
