Figure.41.
Example of checking 45º
outward fence angle.
Figure.42.
Adjusting 45º outward fence
angle.
-38-
Model W1876 (For Machines Mfd. Since 7/20)
SE
RV
IC
E
6.
Loosen fence tilt lock handle and adjust fence to
45º outward position (see
Figure.41
), then tighten
handle.
7.
Place combination square on jointer table with 45º
outward side against fence (see
Figure.41
).
— If fence is flush against combination square,
45º outward fence positive stop is set correctly.
Proceed to
Step.9
.
— If fence
is not
flush against combination square,
proceed to
Step.8
.
Stop
Block
45º Set
Screw
8.
Adjust fence until it is flush against combination
square, then tighten 45º set screw on fence slide
bracket until it contacts stop block (see
Figure.42
).
9.
Loosen fence tilt lock handle and adjust fence to 90º
position, then tighten handle.
10.
Place combination square on jointer table with 90º
side against fence, and verify fence is flush against
combination square.
— If fence is flush against combination square, fence
positive stops are set correctly.
— If fence
is not
flush against combination square,
perform
Steps.5–10
to set fence positive stops.
Содержание W1876
Страница 52: ......
