Figure.9.
Button head cap screws used to
install fence support bracket.
Figure.11.
T-slot on rear side of fence.
Figure.10.
Button head cap screws and
T-slot nuts installation.
-16-
Model W1876 (For Machines Mfd. Since 7/20)
SE
TU
P
Assembly
Before beginning the assembly process, refer to
Items.
Needed.for.Setup
and gather everything you need.
Ensure all parts have been properly cleaned of any
heavy-duty rust-preventative applied at the factory (if
applicable). Be sure to complete all steps in the assembly
procedure prior to performing the
Test.Run.
or connecting
the machine to power.
To.assemble.jointer,.do.these.steps:
1..
Remove (4) button head cap screws from jointer
base and use to install fence support bracket (see
Figure.9
).
2..
Install (2) M6-1 X 16 button head cap screws and (2)
7mm T-slot nuts on fence slide bracket (see
Figure.
10
). DO NOT tighten at this time.
3..
Install fence on fence slide bracket by inserting (2)
7mm T-slot nuts installed in
Step.2
into T-slot on
rear side of fence (see
Figure.11
).
Fence Slide
Bracket
Button Head
Cap Screw
(1 of 4)
Fence Support Bracket
Fence Slide Bracket
Button Head
Cap Screw
(1 of 2)
T-Slot Nut
(1 of 2)
Fence
T-slot
Содержание W1876
Страница 52: ......
