Shop fox W1876, Руководство пользователя

Страница: 25 / 52

Previously Surface
Planed Face
15 30
45
Previously
Jointed
Edge
-23-
Model W1876 (For Machines Mfd. Since 7/20)
O
PE
R
ATIO
NS
Squaring.Stock
Squaring stock involves four steps performed in the
order below:
1. Surface Plane on the Jointer: Concave face of
workpiece is surface planed flat with jointer.
2. Surface Plane on a Thickness Planer: Opposite face
of workpiece is surface planed flat with a thickness
planer.
3. Edge Joint on the Jointer: Concave edge of
workpiece is jointed flat with jointer.
4. Rip Cut on a Table Saw: Jointed edge of workpiece
is placed against a table saw fence and opposite
edge cut off.
Squaring stock means making it flat and parallel along
both length and width, and making the length and width
perpendicular to one another. The purpose of squaring
stock is to prepare it for accurate cuts and construction
later on.
A properly "squared up" workpiece is essential for tasks
such as accurate table saw cuts, glue-ups/laminations,
cutting accurate bevels on a bandsaw, and many other
applications where one surface of a workpiece is used to
reference another.
Item(s).Needed. Qty
Jointer ............................................................1
Planer .............................................................1
Table Saw ........................................................1