Shinko ACD-13A Скачать руководство пользователя страница 52

Страница: 52 / 132

- 52 -

7. Settings

There are 2 setting methods for this controller: Simplified setting, Group selection.

7.1 Simplified Setting Method

Simplified setting method, which is effective for the Fixed value control, is the same

method as when setting standard Shinko controllers.

7.1.1 SV Setting Mode

To enter the SV setting mode, press the

key in PV/SV Display Mode.

If ‘Set value memory’ is selected in [Event input allocation], only the memory number

selected by terminal connection can be set.

To set other Set value memory number, select it again by connecting terminals.

Character

Setting Item, Function, Setting Range

Factory Default

• Sets SV.
• Setting range: Scaling low limit to Scaling high limit

7.1.2 Event Setting Mode

To enter Event setting mode, press the

and

keys (in that order) together

in PV/SV Display Mode.

If ‘Set value memory’ is selected in [Event input allocation], only the memory number

selected by terminal connection can be set.

To set other Set value memory number, select it again by connecting terminals.

Character

Setting Item, Function, Setting Range

Factory Default

EVT1 alarm value

• Sets EVT1 alarm value.

If the independent alarm (High/Low limits independent, High/Low limit

range independent, or High/Low limits with standby independent) is

selected in [Event output EVT1 allocation], the EVT1 alarm value

matches the EVT1 low limit alarm value.

Setting the value to 0 or 0.0 disables this alarm (except Process

high and Process low alarm)

Not available if No event is selected.

Available when the Alarm output is selected in [Event output EVT1

allocation].

• Setting range: Refer to (Table 7.1.2-1) on p.55.

EVT1 high limit alarm value

• Sets EVT1 high limit alarm value.

Setting the value to 0 or 0.0 disables this alarm (except Process

high and Process low alarm)

Available when the independent alarm (High/Low limits independent,

High/Low limit range independent, or High/Low limits with standby

independent) is selected in [Event output EVT1 allocation].

• Setting range: Refer to (Table 7.1.2-1) on p.55.

Содержание ACD-13A





































































































































Результаты поиска

Содержание ACD-13A

Отзывы:

Бренды по названию

Популярные бренды

Shinko ACD-13A, Инструкция по эксплуатации

Результаты поиска

Содержание ACD-13A

Отзывы:

Бренды по названию

Популярные бренды