Shindaiwa DGW400DMK, Руководство владельца и оператора

Страница: 15 / 48

- 12 -
(2) AC Meter
The equipment includes an AC meter that displays the
single phase 110/115V generated output.
The AC meter is equipped with an AC meter selector
that can be switched to display voltage, current or
frequency.
<Note>

During operation, the single phase 110/115V output
voltage of the AC power source is constantly
displayed regardless of whether the breaker is set to
"ON" or "OFF".
5-6. Error Code Display
The equipment includes an error code
display function that notifies the operator
of any errors during operation. If an error
is detected during operation, error codes
are displayed by the DC and AC meters.
If this occurs, stop operation immediately,
and inspect and repair the location
where the error has occurred.
(Refer to section "14. Troubleshooting".)
5-7. Monitor Lamp
Warning: Injury/Electric Shock

Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.
Caution: Burn

The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.

Never open the radiator cap during operation or immediately after stopping the
equipment. Hot cooling water and steam will spurt out.

Always be sure to stop the engine and allow it to cool before inspecting or changing
the engine oil. Opening the oil gauge or oil plug during operation will result in hot oil
spurting out.
The equipment includes monitor lamps for water
temperature, battery charge, oil pressure and spill
containment.
If the equipment is normal, the "CHARGE" and "OIL
PRESS" monitor lamps light up when the starter switch
is switched from "STOP" to "RUN", and all monitor
lamps turn off when the engine is started. If any error
besides that of spill containment occurs during
operation, the corresponding monitor lamp lights up
and the engine is automatically stopped. If the engine
is automatically stopped, return the starter switch to
"STOP" and restart the engine. Watch the lit/unlit status
of the monitor lamps the next time an automatic stop
occurs and check the error contents.
AC Meter
AC Meter Selector
Error Code Display
(Also used as DC and AC meters)
Battery
Charge
Water Temp
Oil Press
Spill
Containment