Shindaiwa DGW400DMK, Руководство владельца и оператора

Страница: 31 / 48

- 28 -
12. Inspection/Maintenance
Warning: Electric Shock/Injury

Always be sure to stop the engine and remove the engine key before performing
any equipment check or maintenance.

Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.

Do not modify the equipment and do not operate with parts removed.
Warning: Fire

Always be sure to stop the engine when inspecting fuel or refueling, and absolutely
never perform such tasks near fire or other open flame. Wait until the engine has
completely cooled before inspecting fuel or refueling.

Always be sure to wipe up any spilled fuel or oil.

Spilled fuel and oil accumulates in the spill containment. Do not operate the
equipment with liquid accumulated in the spill containment.

Absolutely never use the equipment if there is a fuel, oil or cooling water leak, and
be sure to always repair the leak before using.

Absolutely never inspect or perform maintenance to the equipment near fire or other
open flame.
Warning: Injury to Eyes and Skin

Use protective gear, such as rubber gloves, when inspecting or replacing the battery
due to the dilute sulfuric acid in the battery fluid. Be sure that fluid does not get into
eyes, or on skin or clothing.

If battery fluid gets into the eyes, or on the skin or clothing, immediately wash with a
large amount of water, and always be especially sure to seek medical attention if it
gets into the eyes.
Warning: Explosion

Do not operate the equipment or recharge the battery when the battery fluid level is
below the minimum level.

Do not generate any sparks near the battery and do not allow any fire or other open
flame near the equipment because the battery generates ignitable gas.
Caution: Burn

The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.

Never open the radiator cap during operation or immediately after stopping the
equipment. Hot cooling water and steam will spurt out.

Always be sure to stop the engine and allow it to cool before inspecting or changing
the engine oil. Opening the oil gauge or oil plug during operation will result in hot oil
spurting out.
<Note>

Procedures except for pre-operation inspection must be performed by specialized
technicians.

Items indicated by

: Contact the retail outlet where the equipment was purchased.

Always be sure to use genuine parts when replacing parts.

When removing waste liquid from the equipment, place some container to collect the
liquid and prevent it from spilling on the ground. Dispose of such oil, fuel, cooling
water (LLC), filters, batteries and other harmful substances as industrial waste in
accordance with applicable laws and regulations. Consult with the retail outlet where
the equipment was purchased if you have any inquiries regarding proper disposal.

When performing maintenance with doors or covers open, be sure that no other
persons can accidentally come close to the equipment. Close all doors and covers if
momentarily leaving the equipment unattended.