Shindaiwa DGW400DMK, Руководство владельца и оператора

Страница: 28 / 48

- 25 -
(2) Shielded Metal Arc Welding, Gouging, Scratch Start TIG
1) Switch the single/dual selector in accordance with the amount of welding personnel
and desired weld output.
2) Switch the weld mode selector in accordance with the work being performed.
3) Adjust the output current using the output control dial.
4) If using "CC" weld mode, adjust the arc strength using the arc control dial.
<Note>

The value selected using the output control dial is displayed by the DC meter.
During welding, both the DC ammeter and voltmeter display the actual output values.
When welding is completed, both meters display the actual output values for
approximately 8 seconds, after which display returns to the set values.

The arc control function is only for "CC" mode. It does not function if using "CV" or
"DROOP".
10. Using as a Generator
10-1. Output Types and Ranges
(1) 1-Phase 110/115V
The equipment includes two 1-phase 110/115V
receptacle.
The total maximum output available from the two
receptacles is 10.7kVA.
(2) 1-Phase 230/240V
The equipment includes two 1-phase 230/240V
receptacles.
The total maximum output available from the two
receptacles is 10.7kVA.
10-2. Usable Device Capacities
Usable capacity varies depending on the type and performance of the electrical tool or
household appliance being used.
Overview of Usable Device Capacities (50/60Hz)
Device Used
Standard Capacities (Units: kW)
1-Phase 110/115V 1-Phase 230/240V
Total capacity of
four receptacles
Capacity per
one
receptacle
Total
capacity
Capacity per
one
receptacle
Total
capacity
Incandescent bulbs,
electrical heaters
and similar devices
1.7 / 1.7 3.3 / 3.5 3.5 / 3.6 6.9 / 7.2 9.6 / 10.7
Electrical tools
(commutator motor)
and similar devices
0.8 / 0.9 1.7 / 1.7 1.7 / 1.8 3.5 / 3.6 4.8 / 5.4
Mercury lamps (high
power factor types)
0.7 / 0.7 1.3 / 1.4 1.4 / 1.4 2.8 / 2.9 3.8 / 4.3
Submerged pump,
compressor and
similar devices
(Induction motors)
0.7 / 0.7 1.3 / 1.4 1.4 / 1.4 2.8 / 2.9 3.8 / 4.3
*
Commutator motors: Motors with brushes
*
Induction motors: Motors without brushes
*
Capacity values are displayed under "OUTPUT" for induction motors and under
"POWER CONSUMPTION" for all other devices.
1-P
230/240V Receptacle
1-P
110/115V Receptacle