Shindaiwa DGW400DMK, Руководство владельца и оператора

Страница: 22 / 48

- 19 -
７．
1) Inspect the battery fluid level. If it is near the lower
level, add distilled water until it reaches the upper
level.
2) Inspect for loose terminals and retighten if loose.
<Note>

It is necessary to recharge the battery when the
specific gravity of the battery fluid is 1.23 or less.
Contact the retail outlet where the equipment was
purchased if this occurs.

Battery Replacement Procedures
1) Remove the "
-
" (negative) cable.
(Always be sure to first remove the "
-
" (negative)
side.)
2) Remove the battery hold-down clamp.
3) Remove the
“+” (positive) cable.
4) Remove the battery.
* Install the battery by performing the above
procedures in reverse order.
(Always be sure to first attach the "+" (positive)
side.)
<Note>

Use the specified battery.< 46B24L > (Japanese Industrial Standard)
8. Operating Procedures
Warning: Suffocation from Exhaust Fume

Do not operate the equipment in a poorly-ventilated area such as indoors or within a
tunnel because the engine exhaust fume includes components that are harmful to
humans.
Warning: Fire

Keep any ignitable items (such as fuel, gas and paint) or inflammable items away
from the equipment because the muffler, exhaust fume and other parts attain high
temperatures.

Provide at least 1 meter (3 feet) of distance between the equipment and walls and
other obstacles, and operate the equipment on a flat surface.
Caution: Suffocation from Exhaust Fume

Do not direct the engine exhaust towards passersby, private homes or similar
persons/locations because the engine exhaust fume includes components that are
harmful to humans.
Caution: Burn

The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.
Caution: Injury

Use this equipment with it situated on a stable level surface so that it is prevented
from moving.

Do not move the equipment during operation.

Always be sure to turn off the switches of all devices using the equipment and turn
off the equipment breakers before starting the engine.
[ +]Post
Hold-Down Clamp
[
–]Post
Battery
Terminal
UPPER
LEVEL
LOWER
LEVEL