38
1
Before Measurement
Turn on the power of the moisture analyzer before starting measurement.
^
"Turning the Power On", page 38
When you use the moisture analyzer for the first time, we recommend the span calibration after
installation.
^
"The Span Calibration after Installing the Moisture Analyzer", page 40
Turning the Power On
The following explains how to turn the power on.
1
Connect the power cable.
Insert the female end of the power cable
into the power inlet located at the rear of
the main unit.
Plug in the male end of the power cable to
the outlet.
Caution
Instructions
To prevent electric shock and to
maintain stability in operation of
the product, be sure to ground the
product.
Instructions
Use the specified power cord (10A
rating).
Instructions
Do not palace anything which may
interfere the unplugging operation
near the mains connector of the
power supply cable.
n
1
2
Preparing for
Measurement
