SHARX SECURITY SCNC3904, Руководство пользователя

Страница: 50 / 64

Page 50
To configure LuxRiot software, you would not use Sharx Security as the
manufacturer since LuxRiot has not been updated yet for our new cameras.
Instead, you would select
“
Generic ” as the manufacturer
and “ RTSP Compatible ” for
camera type and then
configure it as follows:
In the “ Access ” tab you’d add
the IP address and port, as well
as the username and password.
The port is generally 80 for all
cameras on your own network,
and 8150 for the first remote
camera.
Then in the RTSP tab you
would uncheck “Use default
port” since that generally uses
the wrong value 554. Instead,
you’d add the exact same port
as you used on the “
Access ”
tab, generally 80 for all local
cameras and 8150 for the first
remote camera.
The option “ RTP over TCP ”
should be checked.
There are 2 “ Path ” fields for
the session description file,
one for high resolution and
one for low resolution.
In the “ High ” field you would enter: /live/0/h264.sdp
The “ Low ” field can remain blank or: /live/1/h264.sdp