EN-22
−
−
−
−
−
EN-9
EN-9
EN-15, 16
EN-13, 14
EN-16
EN-16
EN-17
EN-17
EN-14
EN-16
EN-16
EN-15, 16
Reference
Pages
EN-1
Caution
Danger
Warning
Warning
SAFETY PRECAUTIONS
Matters that must be observed in order to prevent danger to humans and damages to property
are explained.
Details that related to "matters
with high probability of death
or sustaining serious injury".
Details that related to
"matters with probability of
death or serious injury".
Details that relate to "matters with
probability of sustaining minor
injury or damage to property".
Matters for preventing electrocution, fire disaster, electricity leaks and
major injuries
Charger
Stop using the product immediately when there is any abnormality or malfunction.
Location of using product and when
product is in use
Do not damage the power plug or power cord.
Do not use any power outlet that is loose.
Do not insert or remove the power plug with
wet hands.
(Risk of electrocution, short circuiting, ignition of
fire or cause injury.)
Do not use any damaged power plug or
power cord.
Always use the charger that is a genuine
accessory.
Do not use an extension cord.
Remove dust on the power plug periodically.
Remove the plug and wipe with a dry cloth.
Securely insert the power plug to the base.
Burning smell is emitted.
Abnormally hot with the vacuum cleaner body or the
charger deforming from heat.
Abnormal sound is emitted while the product is in operation.
Moving the power plug or the power cord of the
charger results in the Charging lamp on the charger
turning on and off.
The product does not always operate even when the
switch is turned on.
(Risk of fire disaster, electrocution and product
malfunction.)
(Dust accumulating on the power plug may lead to
insulation defects due to humidity and the like, which
can cause fire disaster.)
(Incomplete insertion of a plug may cause fire
disaster, electrocution or short circuiting.)
Do not force the cord or plug to bend
Do not
pull the cord or plug
Do not twist the cord or plug
Do not bundle the cord
Do not pinch the cord
or plug
Do not modify the cord or plug
Do not
allow the cord or the plug to be tangled up in the
Rotary brush of the Suction head
Do not scratch or damage the cord or the plug
Do not place any heavy object on top of the cord or
the plug
(The cord may be damaged and cause fire disaster or
electrocution.)
Do not overload power outlets.
(Risk of fire disaster or electrocution.)
Refer to in
"TROUBLESHOOTING" and contact your nearest
service center approved by SHARP.
Disconnect the power cord of the charger from
the electrical outlet.
Press the and remove the battery from
the vacuum cleaner body immediately.
Do not throw the product
into a fire or heat it.
Do not apply water or detergent on the
vacuum cleaner body or the charger and do
not wash them with water (excluding
components that can be washed with water).
Do not use the product near any substance
that is flammable or allow such
substance to be suctioned
into the product.
Never use the product in a location that is wet
or where it can become wet such as a
bathroom, or where there is high temperature
and high humidity and never allow water to be
suctioned into the product.
(Risk of electrocution, short circuiting and
ignition of fire.)
(Risk of electrocution, short circuiting and
ignition of fire.)
(Risk of explosion or fire disaster.)
Combustible substances
such as toner
Cigarette stubs
Benzene thinners
Kerosene, gasoline and incense
(
Risk of
short circuiting,
ignition of fire, liquid leakage
and explosion.)
Furthermore, do not
place the product
near fire or space
heater, a location exposed
to direct sun light or at a
location with high
temperature such as inside
a car parked under the
flaming sun and the like.
If the Filter care lamp (red) and the Battery level indicator lamp (green) on the vacuum cleaner body are blinking
simultaneously the product may be malfunctioning. Contact your nearest service center approved by SHARP.
A part of the Pleat
filter appears to be
white and floating.
A rattling sound is
coming out of the
Suction head.
The Rotary brush
does not rotate.
The Dust cup
assembly cannot be
assembled.
The Dust cup assembly
cannot be installed on
the vacuum cleaner body
The vacuum cleaner
body is hot
Is there any clogging on the Mesh filters or Pleat filter?
Heat is generated due to the electrical current that is supplied to the
control circuit, but this is not abnormal.
Are respective components of the Dust cup assembly assembled
properly?
Are respective components of the Dust cup assembly assembled properly?
Is the Suction head assembled properly?
During the cleaning of mats or rugs, the Suction head may get stuck to
the material and the Rotary brush may stop.
In this case, continue cleaning in Standard mode.
Is any hair or lint tangled on the brush?
Is the pipe dislodged from the vacuum cleaner body?
The Rotary brush stops automatically for safety purpose when the
Suction head is off the floor. (Safety Stop)
The Rotary brush may stop in some instances as the automatic stop
function is triggered when the Suction head becomes stuck on a surface
when the product is used to clean carpets and mats on which the Suction
head can become closely attached and blocked. In such instances, turn
off the product.
The automatic stop function will be released and the product can then be
used again.
Is there any dirt entangled on the Mesh filters?
Is there any dirt accumulating at the bottom of the Dust Cup?
Is the Pleat filter properly installed to the Filter Cover?
This is a sound emitted by the Roller Switch, due to the structure
(safety stop mechanism).
This is not abnormal.
The white filter material can become visible at times, but there is no quality
issue with such a situation.
Has the Mesh filters or the Pleat filter been washed with water and then
sufficiently dried? [Using the product while moisture remains on or in the
product may lead to the emission of an odor]
Is there much dirt accumulating in the Dust Cup?
(Depending on the type of accumulated dirt some odor may be emitted.)
The temperature of the vacuum cleaner body can rise to about 40°C during operation, but this is
not abnormal.
The charger or the
battery becomes hot
while charging.
The air discharged
from the vacuum
cleaner body smells.
Symptoms
Check here
■
Descriptions of conditions that occur due to erroneous uses are classified in the following manner
for the purpose of providing explanations.
EN-21 and 22
Check details described
below
(prior to requesting
for repairs or contacting
for inquiries).
Hot
Dust cup assembly
Odor
Others
Suction head &
Rotary brush
ENGLISH
MEMO
EC-A1RHK_A4(W page imposition).indd 3-4
2018/12/06 14:26:57
