Sharp DX-C200P Operation, Руководство по оборудованию

Страница: 96 / 168

• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your
skin. If toner comes into contact with your skin, wash the affected area thoroughly with soap and
water.
• If toner or used toner gets into your eyes, flush immediately with large amounts of water. Consult
a doctor if necessary.
• If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a doctor
if necessary.
• Store print cartridges in a cool dark place.
• Actual printable numbers vary depending on image volume and density, number of pages printed
at a time, paper type and size, and environmental conditions such as temperature and humidity.
Toner quality degrades over time. Early replacement of the print cartridge might be necessary.
Therefore, we recommend you always keep a new print cartridge ready.
• For good print quality, the manufacturer recommends that you use genuine toner from the
manufacturer.
• The manufacturer shall not be responsible for any damage or expense that might result from the use
of parts other than genuine parts from the manufacturer with your office products.
When to replace the print cartridge
If the Alert indicator on the control panel lights up and the following message appears on the
display, replace the print cartridge:
"Replace Toner:"
• If cyan, magenta, or yellow toner runs out, you can print in black and white using black toner.
Change the color mode setting to Black and White using the printer driver.
• If black toner runs out, you cannot print in black and white or color until the black print
cartridge is replaced.
• Do not allow paper clips, staples, or other small metallic objects to fall inside the machine.
• Do not expose the print cartridge without its cover to direct sunlight for a long time.
• Do not touch the print cartridge's photo conductor unit.
6. Replacing Consumables
94