Sharp DX-C200P Operation Скачать руководство пользователя страница 30

Страница: 30 / 168

• Do not use any power sources other than those that match the specifications shown in this

manual. Doing so could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could

result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords

that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric

shock.

• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs

create an unstable connection that can result in unsafe buildup of heat.

2. Installing the Printer and Options

Содержание DX-C200P Operation









































































































































































Результаты поиска

Содержание DX-C200P Operation

Отзывы:

Похожие инструкции для DX-C200P Operation

Бренды по названию

Популярные бренды

Sharp DX-C200P Operation, Руководство по оборудованию

Результаты поиска

Содержание DX-C200P Operation

Отзывы:

Похожие инструкции для DX-C200P Operation

Бренды по названию

Популярные бренды