manualshive.com logo in svg

Sharp AL-2061, Руководство по эксплуатации, Страница: 46 / 178

Поделиться
Скачать
Sharp AL-2061 Скачать руководство пользователя страница 46

INSTALLING THE SOFTWARE

44

10

You will return to the window of step 8. If you wish to install 
Button Manager, click the "Button Manager" button.

If you do not wish to install the Button Manager, click the "Close" button and 
go to step 12.

11

If you wish to install the PC-Fax driver, click the "PC-Fax 
Driver" button in step 8.

12

In the port selection screen that appears when the PC-Fax driver is being 
installed, select the same port as the MFP driver that is already installed.

12

When installing is finished, click the "Close" button.

A message will appear instructing you to connect the machine to your 
computer. Click the "OK" button.

13

Make sure that the power of the machine is turned on, and then 
connect the USB cable (p.45).

Windows will detect the machine and a Plug and Play screen will appear.

14

Follow the instructions in the plug and play window to install 
the driver.

Follow the on-screen instructions.

This completes the installation of the software.

If you installed Button Manager, set up Button Manager as explained in "SETTING 
UP BUTTON MANAGER" (p.57).

After the installation, a message prompting you to restart your computer 
may appear. In this case, click the "Yes" button to restart your computer.

• If you are using Windows Vista or 7 and a security warning window 

appears, be sure to click "Install this driver software anyway".

• If you are running Windows 2000/XP and a warning message 

appears regarding the Windows logo test or digital signature, be sure 
to click "Continue Anyway" or "Yes".

After the installation, a message prompting you to restart your computer 
may appear. In this case, click the "Yes" button to restart your computer.

• If you are using Windows Vista or 7 and a security warning window 

appears, be sure to click "Install this driver software anyway".

• If you are running Windows 2000/XP and a warning message 

appears regarding the Windows logo test or digital signature, be sure 
to click "Continue Anyway" or "Yes".

Содержание AL-2061



















































































































































































Отзывы:

Нет отзывов