Sharp AL-2061 Скачать руководство пользователя страница 171

Страница: 171 / 178

169

ABOUT SUPPLIES AND OPTIONS

When ordering supplies, please use the correct part numbers as listed below.

Supply list

* Based on copying onto A4 size paper at 5% toned area.

(The life of the TD cartridge which has been included in the machine at the factory
is approximately 2,000 sheets.)

Interface cable

Please purchase the appropriate cable for your computer.

USB interface cable

USB cable that supports USB 2.0.

LAN interface cable

Shielded type cable.

Be sure to use only genuine SHARP parts and supplies.

For best copying results, be sure to use only SHARP Genuine
Supplies which are designed, engineered, and tested to maximize
the life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.

Supply

Part number

Usable life

TD cartridge

AL-214TD

Approx. 4,000 sheets *

Drum cartridge

AL-100DR

Approx. 18,000 sheets

Содержание AL-2061



















































































































































































Результаты поиска

Содержание AL-2061

Отзывы:

Sharp AL-2061, Руководство по эксплуатации, Страница: 171 / 178

Результаты поиска

Содержание AL-2061

Отзывы: