Sharp AL-2061 Скачать руководство пользователя страница 17

Страница: 17 / 178

PREPARATIONS

Press the [OK] key.

Press the [MENU] key.

Press the [MENU] key to exit.

Initial settings

The machine reverts to the initial settings when it is first turned on, when the [CLEAR
ALL] key (

) is pressed, or when no keys are pressed for the preset "AUTO

CLEAR" time following the end of a copy job. When the machine reverts to the initial
settings, all settings and functions selected to that point are canceled. The "AUTO
CLEAR" can be changed in the user programs. (p.135)

Scanning unit (scan head)

When the machine is able to copy or scan (the ready indicator is on), the scanning
unit is lit.

To change the date and time or the format after once they are set, see
page 138 (USER PROGRAMS) and select program number 31 or 32 of
copy mode.

Copy ratio:

100%,

Exposure:

Automatic

Copy quantity:

All special copier modes:

Off

AL-2061

The main screen of
copy mode appears

When in the copy mode

Содержание AL-2061



















































































































































































Результаты поиска

Содержание AL-2061

Отзывы:

Sharp AL-2061, Руководство по эксплуатации, Страница: 17 / 178

Результаты поиска

Содержание AL-2061

Отзывы: