Sharp AL-2061, Руководство по эксплуатации, Страница: 122 / 178

SCANNER AND FAX FUNCTIONS
120
5
Enter search characters and press the
[OK] key.
You will search the names that were entered for
the destinations. Destinations matching the search
characters will appear. To enter characters, see
"How to enter characters" (p.125).
6
Press the [ ] key ( ) or [ ] key ( ) to select the
destination and then press the [OK] key.
7
Press the [ ] key ( ) or [ ] key ( ) to
select the original size and then press the
[OK] key.
The original size changes as follows each time the
[
] key ( ) or [ ] key ( ) is pressed:
"A4"
→
"B5"
→
"A5"
→
"8.5x14"
→
"8.5x13"
→
"8.5x11"
→
"8.5x5.5".
8
Press the [OK] key and then [ ] key ( ) or [ ] key ( ) to
select the color mode (COLOR, GRAY and B/W) and exposure
level.
(For the setting, see page 118.)
9
Press the [START] key ( ) to begin scanning.
• The [CLEAR] key ( ) can be pressed during a scanning operation
to return to the previous step of the operation. To cancel a scanning
operation and return to the initial state of scanner mode, press the
[CLEAR ALL] key (
).
• The network scanner function cannot scan both sides of an original
placed in the RSPF.
• The scan settings stored in a scan mode cannot be edited if the scan
mode has been selected for a destination. You can either store the
desired settings in a new scan mode as explained in "Storing
scanning settings - Network Scanning" (p.98) and then edit the
destination settings, or you can cancel the selection of the scan mode
for the destination and then edit the scan mode settings.
• Before performing Scan to E-mail, read "Important points when using
scan to E-mail" (p.145). Take care that the image file is not too large.
• A limit for the size of image files that can be sent using Scan to E-mail
can be set in "Basic settings for network scanning" (p.114) of the Web
page.
SCAN USING:
S
ORIG. SIZE ENTER
A4