Sharp AL-2061 Скачать руководство пользователя страница 151

Страница: 151 / 178

TROUBLESHOOTING AND MAINTENANCE

149

Paper misfeed.

Misfeed occur.

→

To remove the misfeed, see "MISFEED

REMOVAL".

157

The paper is outside of the specified
size and weight range.

→

Use copy paper within the specified

range.

Paper curled or damp.

→

Do not use curled or crimped paper.

Replace with dry copy paper. During
periods when the machine is not used
for a long time, remove the paper from
the tray and store it in a dark place in a
bag to prevent moisture absorption.

Paper is not loaded properly.

→

Make sure that the paper is properly

loaded.

Pieces of paper inside machine.

→

Remove all pieces of misfed paper.

158

Too much paper is loaded in the tray.

→

If the stack of paper is higher than the

indicator line on the tray, remove some
of the paper and reload so that the
stack does not exceed the line.

Some sheets of paper stick together.

→

Fan the paper well before loading it.

The guides on the bypass tray do not
match the width of the paper.

→

Adjust the guides to match the width of

the paper.

White or black lines
appear on copies.

The scanner glass of the RSPF is dirty.

→

Clean the long, narrow scanning

window.

166

The TD cartridge or drum cartridge is
dirty.

→

Clean the TD cartridge or drum

cartridge.

167

The transfer charger is dirty.

→

Clean the transfer charger.

168

Problem

Cause and solution

Page

Содержание AL-2061



















































































































































































Результаты поиска

Содержание AL-2061

Отзывы:

Sharp AL-2061, Руководство по эксплуатации, Страница: 151 / 178

Результаты поиска

Содержание AL-2061

Отзывы: