manualshive.com logo in svg

Sharp AL-2061, Руководство по эксплуатации, Страница: 161 / 178

Поделиться
Скачать
Sharp AL-2061 Скачать руководство пользователя страница 161

TROUBLESHOOTING AND MAINTENANCE

159

2

Gently remove the misfed paper 
from under the fusing unit as shown 
in the illustration. If the paper cannot 
be removed, proceed to "C: Misfeed 
in the transport area".

3

Raise the fusing unit release lever and then close the side 
cover by pressing the round projections near the side cover 
open button. The error indicator will go out and the ready 
indicator will light up.

C: Misfeed in the transport area

1

Lower the fusing unit release lever.

See "B: Misfeed in the fusing area" (p.158).

2

Open the front cover.

To open the front cover, see START GUIDE.

3

Rotate the roller rotating 
knob in the direction of the 
arrow and gently remove the 
misfed paper from the exit 
area.

The fusing unit is hot. Do not touch the fusing unit when 
removing misfed paper. Doing so may cause a burn or other 
injury.

• Do not touch the surface of the drum (green portion) of the drum 

cartridge when removing the misfed paper. Doing so may cause 
smudges on copies.

• Do not remove the misfed paper from above the fusing unit. Unfixed 

toner on the paper may stain the paper transport area, resulting in 
smudges on copies.

Roller rotating 
knob

Содержание AL-2061



















































































































































































Отзывы:

Нет отзывов