SEW MOVITRAC LTP series, Руководство по эксплуатации

Страница: 45 / 80

Operating Instructions – MOVITRAC® LTP
45
8
Selection of Parameter P2-01, Digital Input Function
Parameters
8.3.2 Selection table if P1-12 = 1 or 2 (Keypad mode)
P2-01 Digital input 1
(DI1) Digital input 2
(DI2) Digital input 3 (DI3) Analog input (AI) Comments / Preset value
0 O: Stop (Disable)
C: Run (Enable) C: Increase speed C: Decrease speed No effect Close DI2 & DI3 simultaneously
to start drive.
1 O: Stop (Disable)
C: Run (Enable) C: Increase speed External trip input:
O: Trip
C: OK C: Decrease speed Close DI2 & analog input simulta-
neously to start drive.
Connect an external PTC motor
thermistor or similar to DI3.
2 O: Stop (Disable)
C: Run (Enable) C: Increase speed O: Digital speed ref
C: Preset speed 1 Analog input > 5 V
reverses rotation. Reverse operation only available
in P1-12 = 2.
3 ... 9,
13, 14,
16
1)
O: Stop (Disable)
C: Run (Enable) C: Increase speed C: Decrease speed O: Forward
C: Reverse Close DI2 & DI3 simultaneously
to start drive.
10 O: Stop (Disable)
C: Run (Enable) O: Digital speed ref
C: Analog input External trip input:
O: Trip
C: Run Analog speed ref Connect an external PTC motor
thermistor or similar to DI3.
11 O: Stop (Disable)
C: Run (Enable) O: Digital speed ref
C: Preset speed 1 External trip input:
O: Trip
C: Run Analog input > 5 V
reverses rotation. Connect an external PTC motor
thermistor or similar to DI3.
12 O: Stop (Disable)
C: Run (Enable) O: Preset speed 1
C: Analog input External trip input:
O: Trip
C: Run Analog input > 5 V
reverses rotation. Connect an external PTC motor
thermistor or similar to DI3.
15 O: Stop (Disable)
C: Run (Enable) O: Digital speed ref
C: Preset speed 1 O: Decel ramp 1
C: Decel ramp 2 Analog input > 5 V
reverses rotation. –
17 O: Stop (Disable)
C: Run (Enable) O: Digital speed ref
C: Analog input O: Digital / analog
speed
C: Preset speed 1 Analog speed ref DI3 overrides DI2.
18 O: Stop (Disable)
C: Run (Enable) O: Digital speed ref
C: Preset speed Open Open Preset speed 1
Closed Open Preset speed 2
Open Closed Preset speed 3
Closed Closed Preset speed 4
19 O: Stop (Disable)
C: Run (Enable) O: Digital speed ref
C: 2nd analog input No effect Analog input > 5 V
reverses rotation. –
20, 21 O: Stop (Disable)
C: Run (Enable) 2nd digital output:
(+24 V) O: Digital speed ref
C: Preset speed 1 Analog input > 5 V
reverses rotation. 2nd digital output shows drive
healthy.
22 O: Stop (Disable)
C: Run (Enable) 2nd digital output:
(+24 V) External trip input:
O: Trip
C: Run Analog input > 5 V
reverses rotation. Connect an external PTC motor
thermistor or similar to DI3.
2nd digital output shows drive
healthy.
1) In addition to the speed being set using the pushbuttons on the front of the drive, these settings allow the speed to be controlled
remotely using remote pushbuttons connected to digital inputs 1, 2 and 3.
P6..
P60.
P600