SEW-Eurodrive MM 03D-233-00, Краткое руководство по эксплуатации

Страница: 62 / 80

6
Startup of MOVIMOT
®
with MLK.. in Easy mode
Startup procedure
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
62
6.7.6 Inverter behavior depending on the AS-Interface bits
The following table shows the behavior of the MOVIMOT
®
inverter depending on the
status of the AS-Interface bit:
Inverter
behavior
AS-Interface bit Status
LED
Supply
system
X1: L1-L3
DO3 DO2 DO0 DO1
Reset/
control-
ler en-
able
Speed f2/
speed f1
CW
opera-
tion/
stop
CCW
opera-
tion/
stop
Inverter off 0 0 x x x Flashing
yellow
Inverter off 1 0 x x x Yellow
Stop, no supply
system
0 1 x x x Flashing
yellow
Stop 1 1 x 0 0 Yellow
CW rotation with
f1
1 1 0 1 0 Green
CCW rotation
with f1
1 1 0 0 1 Green
CW rotation with
f2
1 1 1 1 0 Green
CCW rotation
with f2
1 1 1 0 1 Green
Stop 1 1 x 1 1 Yellow
0 = No voltage 1 = Voltage x = Any
6.7.7 Brake release without enable
When switch S2/2 is set to "ON", it is possible to release the brake even if there is no
drive enable.
See chapter "DIP switch S2/2" (→
2
53).
This function is only available for brakemotors.
This function is not available in hoist operation.
27792307/EN – 07/2022