SEW-Eurodrive MM 03D-233-00, Краткое руководство по эксплуатации

Страница: 18 / 80

4
Mechanical installation
Installation notes
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
18
4 Mechanical installation
4.1 Installation notes
INFORMATION
Observe the general safety notes.
WARNING
Improper installation/disassembly of MOVIMOT
®
drives and mount-on components.
Risk of injury.
• Adhere to the notes about installation and disassembly.
• Before releasing shaft connections, make sure that there are no active torsional
moments present (tensions within the system).
WARNING
Risk of injury if the drive starts up unintentionally and danger of electrical voltage.
Dangerous voltages may still be present for up to 1 minute after disconnection from
the power supply.
• Disconnect the MOVIMOT
®
drive from the power supply before you start working
on the unit and secure it against unintentional reconnection to the voltage supply.
• Secure the output shaft against rotation.
• Wait for at least 1 minute before removing the MOVIMOT
®
inverter.
• Comply with all instructions referring to the technical data and the permissible con-
ditions where the unit is operated.
• Only use the provided attachment options when mounting the MOVIMOT
®
drive.
• Use only mounting and locking elements that fit into the existing bores, threads
and countersinks.
4.2 Tools required
• Set of wrenches
• Socket wrench, SW8
• Torque wrench
• Screwdriver set
• Compensation elements (washers and spacing rings), if necessary
4.3 Installation requirements
Check that the following requirements are met before you start installing the unit:
• The data on the nameplate of the drive matches the voltage supply system.
• The drive is undamaged (no damage caused by transportation or storage).
27792307/EN – 07/2022