SEW-Eurodrive MM 03D-233-00, Краткое руководство по эксплуатации

Страница: 37 / 80

5
Electrical installation
Connection between MOVIMOT® and motor when mounted close to the motor
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
37
5.9 Connection between MOVIMOT
®
and motor when mounted close to the
motor
Connection between MOVIMOT® and motor when mounted close to the motor
If the MOVIMOT
®
inverter is mounted close to the motor, the connection to the motor
is realized with a pre-fabricated hybrid cable.
Only use hybrid cables from SEW‑EURODRIVE for the connection between the
MOVIMOT
®
inverter and the motor.
5.9.1 Implementing the motor protection
The implementation of the motor protection and the possible motor plug connectors
depend on the selected connection option:
Connection option Implementing motor protection Motor plug con-
nector
• MM../AVSK
TH motor protection (bimetallic
thermostat).
Connection at sensor input DI2
• APG4
• ALA4
• Terminals
Motor protection by thermal motor
protection model.
Activated by parameters P340
and P347 .
See chapter "Motor protec-
tion" (→
2
64).
• APGX
• Terminals
• MM../AZSK
• MM../AND3/AZSK
• MM../AZZK
• MM../AND3/AZZK
• MM../AZFK
Motor protection by thermal motor
protection model.
Activated by parameters P340
and P347 .
See chapter "Motor protec-
tion" (→
2 64).
• APGX
• Terminals
27792307/EN – 07/2022