SEW-Eurodrive MM 03D-233-00, Краткое руководство по эксплуатации

Страница: 25 / 80

5
Electrical installation
Installation instructions
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
25
5.2.2 Permitted cable cross section of the MOVIMOT
®
terminals
Power terminals
Observe the permitted cable cross sections for installation:
Power terminals
Cable cross section 1.0 mm
2
– 4.0 mm
2
(2 x 4.0 mm
2
)
Conductor end sleeves • For single assignment:
Connect only single-wire conductors or flexible
conductors with conductor end sleeves
(DIN 46228, material E‑CU)
with or without
plastic collars .
• For double assignment:
Connect only flexible conductors with conductor
end sleeve (DIN 46228 - 1, material E‑CU)
without plastic collar .
• Permitted length of the conductor end sleeve: at
least 8 mm
24 V AUX-PWR terminals
Adhere to the permitted cable cross sections for installation:
24 V AUX PWR terminal ("24V"/"
'
") for MLK30A , MLK31A
Cable cross section 0.2 mm
2
– 2.5 mm
2
INFORMATION
MOVIMOT
®
with MLK32A is connected to the 24 V AUX-PWR using a M12 plug con-
nector. For MOVIMOT
®
with MLK32A, the terminals "24V" and " ⊥ " may only be used
for internal wiring.
Control terminals
Observe the permitted cable cross sections for installation:
Control terminals
Cable cross section
• Single-wire conductor
(bare wire)
• Flexible conductor
(bare litz wire)
• Conductor end sleeve
without plastic collar
0.5 mm
2
– 1.0 mm
2
• Conductor end sleeve
with plastic collar
0.5 mm
2
– 0.75 mm
2
Conductor end sleeves • Connect only single-wire conductors or flexible
wire conductors
with or without conductor end
sleeve (DIN 46228, material E‑CU).
• Permitted length of the conductor end sleeve: at
least 8 mm
27792307/EN – 07/2022