Sequoia FastTracer, Инструкция по использованию и установке

Страница: 47 / 54

47
Start>Programs>Sequoia IT Esplora 3D>Esplora 3D 1.2.z.t
Should the program not start or any error messages be displayed, follow the suggestions provided in
paragraphs 2.3 and 2.5 of the present manual.
When Esplora 3D is started, the program main view will display two options: Test Model Instance
and Browse Model Instance Tests Reports. The Test Model Instance key will start the machine
diagnostics procedures, while the Browse Model Instance Tests Reports key will browse stored
reports. Before diagnostics, always make sure that the software has loaded the suitable archive
(Model DB).
5.2.1 Import Model DB
As stated above, make sure that Esplora 3D has loaded the Model DB concerning the analysed
machine. Proceed as follows:
File>Import Model DB or press Ctrl + 1
An open file …view will be displayed, select the reference database and click open.
5.3. Test model instance: model – machine selection
To carry out the machine diagnosis, click on Test Model Instance.