8
1.3 Definitions
Before explaining how to use the FastTracer, some aspects should be dealt with, such as the
FastTracer technical specifications, the type of measurements which can be carried out and what
information can be obtained from these data.
1.3.1 Technical specifications
The FastTracer solution consists of an acquisition device (also called sensor or measurement
device) and a software for data display and processing. The measurement device is fitted inside with
an innovative MEMS triaxial capacitive accelerometer interfaced with a microprocessor processing
and transmitting the digital signal to the PC through the USB 2.0 or via WiFi (opt.). The digital
transmission of measurements ensures the data resistance to electro-magnetic disturbances while the
MEMS technology provides the sensor with a self-diagnosis capacity thus minimizing the need for
routine calibration. The software developed by Sequoia IT and provided with FastTracer are
FTAnalyzer and Esplora 3D. These two types of software and their application for diagnostics and
measurement are fully described in the pages below. The system is equipped with a complete
solution which does not require any other software or hardware, offering an excellent acquisition
device shock resistance up to 10,000g, the possibility of updating the firmware via software,
reduced costs and IP67 protection level.
TECHNICAL SPECIFICATIONS
Maximum acceleration:
+/- 5 g optional: 2g, 18g
Frequency band:
0 – 2500 Hz
Resolution:
0.0025 m/s
2
Noise:
0.075 m/s
2
Dimensions:
30 x 55 x15 mm
Weight:
55 g
Cable length:
3 -30 m
Communication:
USB 2.0 – Wi Fi (Optional)
Protection rating:
IP67
Shock resistance:
10,000 g
Temperature range:
0° C..+70°C
Conformity:
CEI UNI – EN 61000-6-2/4
Software:
FastTracer suite Software
Содержание FastTracer
Страница 2: ...Printed in February 2010...
Страница 53: ...53 Notes...
