Sequoia FastTracer, Инструкция по использованию и установке

Страница: 16 / 54

16
After detecting the cause-effect relation, the FTEditor of FTAnalyzer can be used to work out a test
model dedicated to the analysed machine. Less skilled users can apply this model through the
Esplora 3D software and follow the instructions (set out by the skilled user in the FTEditor model)
to carry out the fault diagnosis operation. See chapters 4 and 5 for the use of FTEditor and Esplora
3D.
3.3 Start
To start FTAnalyzer, find the Windows start button and click as follows:
Start>Programs>SequoiaIT>FTAnalyzer>FTAnalyzer 1.2.z.t
Should the program not start or any error messages be displayed, follow the suggestions provided in
paragraphs 2.3 and 2.5 of the present manual.
3.4 Interface
The FTAnalyzer interface is similar to that of many modern programs and consists (see figure
below) of an action toolbar, a device toolbar and different tool toolbars (highlighted), a Devices List
(highlighted) and various Graphics areas (highlighted). This paragraph will present the above
mentioned FTAnalyzer interface components.
FTAnalyzer: Interface