Sequoia FastTracer, Инструкция по использованию и установке

Страница: 14 / 54

14
FTAnalyzer
3.1 Introduction
FTAnalyzer is a software which transforms a normal computer into an instrument for the display,
storage and processing of the measures obtained through FastTracer devices.
Be aware of the following features before the software presentation:
o
FastTracer acquisition devices measure acceleration in the device application point
according to the x,y,z tern indicated on the sensor casing; this tern will be used as reference
for directions and points of measurement;
o
The fixed sensor acquisition sample rate is 18113.21 sample/s;
o
The device can acquire accelerations with maximum module corresponding to the full scale
of your FastTracer (± 18g, ± 5g, ± 2g) and frequency between 0 Hz and 2500 Hz.
For the best use of FastTracer devices, carefully read the pages below as they provide a description
of FTAnalyzer functions.
3.2 Philosophy of use
FTAnalyzer processes and displays the values acquired in real time or off-line by one or more
measurement devices. The maximum number of FastTracer devices which can be used at the same
time is not limited and depends exclusively on the computer hardware. FTAnalyzer can:
•
process or display values measured at different times (off-line) and save them to file;
•
save measures to file during acquisition;
•
export measures to other numerical software;
•
export data to a Microsoft Excel or text document;
•
filter measures through high/low pass filters;
•
compare measures taken at different times.
3