Sequoia FastTracer, Инструкция по использованию и установке

Страница: 13 / 54

13
Correct positioning requires the sensor to be set very close to the vibration sources to enable
detection and the measurement point shall be chosen according to the type of analysed vibration.
Sections [1] and [2] provide indications on the sensor positioning for machine monitoring.
Before measurement the user shall make sure the sensor is well secured, otherwise measures might
be altered by vibrations. The acquisition device is equipped with magnetic adapters, an excellent
solution for the sensor fastening; you can also consider using cyanoacrylate glues (e.g. Loctite).
Tight fastening is extremely important, therefore the best solution is to fix the sensor by means of
coach screws.
2.5 Frequently Asked Questions (FAQ)
Q. The software does not see the connected device.
A. Open the Device List and click the Refresh Device List key.
Q. The software does not start correctly.
A. Try to connect a FastTracer acquisition device; if the problem persists, reinstall the software
following the procedure explained in paragraph 2.3.
Q. How many FastTracer devices can be used at the same time?
A. The maximum number of FastTracer devices which can be used at the same time is not limited
and depends exclusively on the computer hardware.
Q. How can I receive technical assistance?
A. For Sequoia IT technical assistance e-mail to
info@sequoia.it
Q. Can I copy or use different copies of Sequoia IT software and documentation on my
company’s computers?
A. The software and the documentation can be used and copied freely on every computer held by
the FastTracer system purchaser.