Sequoia FastTracer, Инструкция по использованию и установке

Страница: 21 / 54

21
SINGLE to enable the trigger function.
NONE to disable the trigger function
To set the trigger value
POSITIVE the acquisition starts when the sign al
goes up through the trigger value.
NEGATIVE the acquisition starts when the signal
goes down through the trigger value
Stop time after trigger in ms
Axis where the trigger function shall be enabled.
Conditions are based on the OR logic
To display the device sending data to the viewed
graphics area
When active, the data acquisition is blocked
To start/turn off the data recording on file.
For further information on the icon functions, see the
section on File Devices
To display files and the related information storage
path
To set the file name where the data will be stored if
recording has started
To move display in the active graphics area
To identify a diagram area to export to spreadsheet,
save to file image or print