5-4
Blank sheet appears.
Inspection/check item
Action
Print data
Check the current print data to see if blank sheet data is
sent.
Media jam occurs frequently.
Inspection/check item
Action
Media type
Check whether the set media type matches the media
type setting. (
P.3-28 "MEDIA MENU"
)
Media installation
Install the media properly. (
P.2-7 "Media installation
and removal"
)
Foreign matter in the carriage path
Remove the foreign matter, if any. (
P.5-6 "How to
clear media jams"
)
Foreign matter in the media feed
path
Remove the foreign matter, if any. (
P.5-6 "How to
clear media jams"
)
Suction fan power
If the suction fan power is not best set, reduce the power.
(
P.3-36 "SUCTION FAN LEVEL"
)
Heater temperature setting
If the heater temperature is not best set, lower the heater
temperature. (
P.2-101 "Changing temperature
using the heater control menu"
)
Print speed is low.
Inspection/check item
Action
High-temperature environment
If the printer temperature is higher than 40°C, the
printer prints media at a lower printing speed. Set the
atmospheric temperature to 20 to 25°C (recommended
temperature) and leave the printer for at least one hour,
and then start printing.
USB transfer speed
Check the USB transfer speed. When the USB connection
is made at the full speed, change the host computer
connection configuration to high-speed USB connection
to increase the printing speed.
