1-3
1
O
v
er
vie
w
Operating conditions
Environmental conditions
Operating temperature and humidity levels
Use the printer within the temperature and humidity levels shown below.
Temperature: 15°C to 30°C (60°F to 80°F)
Humidity: 30% to 70%
To obtain better print quality, use the printer within a temperature range of 20 to 25°C
(68 to 77°F).
To keep a stable and good print quality, the printer slows down the print speed when
the head temperature exceeds 40°C (104°F).
Note
If the printer is used out of the operating temperature and humidity ranges, the
print may be stopped or the print quality may be degraded.
It takes time for the printer to reach the operating environment temperature and
humidity. To get good print image quality, it is recommended to keep the room
temperature 20 to 25°C, 68 to 77°F and use the printer after 1 hour.
–
–
Places where the printer must not be installed
Do not install the printer in the following places.
Places near fire
Places exposed to direct sunlight
Places subject to vibration
Places with excessive dust
Places subject to extreme changes in temperature or humidity
Places near an air conditioner or a heater
Places where the printer may get wet
Places exposed to direct exhaust air from an air vent
Places near a diazo copier that may generate ammonia gas
Places with poor ventilation
Unstable places
