![background image](http://html.mh-extra.com/html/seemecnc/delta/delta_manual_1233154016.webp)
As you watch the print start, you’re going to see something similar to the image below.
#1 above is the “skirt” that the default profile uses to prime the hot end with plastic. If
you’d configured Cura to print a brim, this skirt would touch the outer perimeter of the part and
expand outward concentrically for the distance specified by the brim settings.
#2 above are the perimeters that were printed for the actual part. The photo has caught
the process just as the first infill layer has begun to print. Below you can see what this first layer
looks like.
16
Skirt & Perimeter
First layer!