15
Outputs On Off
User Code Level: 5 and above.
Function: Allows you to turn the system relay outputs on and off.
This function is used to individually turn your system’s relay outputs
on and off. Your system may use these outputs to control interior and
exterior lighting, or heating, air conditioning, or other appliances.
When this function is selected, you’ll be prompted to enter your
security code. After the code is accepted by the system, you can enter
the output number to turn on or off.
The names and numbers of the relays connected to your system are
located in the System Setup section of this guide.
Turning the Outputs On and Off
1. Access the User Menu.
2. Press the COMMAND key until OUTPUTS ON/OFF? displays.
3. Press any one of the SELECT keys.
4. The keypad displays OUTPUT: - ON OFF.
5. Enter the output number you want to turn on or off. The output
number will appear in the display.
6. With the output number displayed, press the SELECT key under
ON or OFF. The output is then turned on or off, depending on
your selection, and remains in that state until you change it.
7. The system automatically removes the output number and a new
output number can be entered. Refer back to step 5.
To exit the Output menu option, press the ARROW key until you've
returned to the keypad's Status List.
User Menu
Loop Status
User Code Level: All users at any time.
Function: Displays a list of armed, bypassed, or alarmed loops. Also
allows you to check the status of individual loops.
Loop Status can be used to give you a list of loops by category or
display the current status of an individual loop number. The four
categories are:
• Armed Loops - loops that are currently armed.
• Bypassed Loops - loops that are currently bypassed.
• Alarmed Loops - loops that have tripped during the current or
previous armed period.
• Number - enter the number of any loop to check its status.
When you select Loop Status, the system prompts you for the
category of status. If you choose one of the first three categories, the
list of loops in that category will follow immediately, including loop
number and name. If you choose to enter an individual loop number
you’ll be asked for the specific number, then the loop name and status
will be displayed.
Using the Loop Status Function
1. Access the User Menu.
2. Press the COMMAND key until LOOP STATUS? displays.
3. Press any of the SELECT keys. The keypad displays ARM
BYPS ALR NBR.
Содержание Executive series
Страница 39: ...36 Notes ...
Страница 40: ...LT 0172 1 96 ...