Security Command Executive series, Руководство пользователя

Страница: 17 / 40

14
Door Access
User Code Level: 1 and 2 - During schedules only. 3 to 9 - Anytime.
Function: Operates an electric door strike from the keypad.
Door Access is used to operate a door strike relay that is built in to
some Security Command keypads. Power for the door strike is
connected to the keypad relay and can be interrupted by using the
Door Access function.
When Door Access is selected you’ll be asked to enter your code
number. When the code number is accepted, the door strike at the
Security Command you’re operating turns on for five seconds.
Door Access also functions any time any area of the system is
disarmed at the door strike keypad or by simply entering your code
number and pressing COMMAND.
A report of this entry can be transmitted to your central station. This
report is optional and can be programmed for you at any time.
Using the Door Access
1. Access the User Menu.
2. Press the COMMAND key until DOOR ACCESS? displays.
3. Press any one of the SELECT keys.
4. The door strike relay turns on for five seconds.
User Menu
Armed Areas Display
User Code Level: 1 and 2 - During schedules only. 3 to 9 - Anytime.
Function: Displays all armed areas in the system.
Armed Areas is used to display all of the armed areas in your system
at the Security Command keypads. Each armed area is displayed
along with its area number and name.
Using the Armed Areas Function
1. Access The User Menu.
2. Press the COMMAND key until ARMED AREAS? displays.
3. Press any one of the SELECT keys. The keypad then begins to
display each armed area. To scroll through the armed areas you
can press the COMMAND key.
All/Perimeter and Home/Away systems: Armed areas for
these systems are shown as 1-PERIMETER and 2-INTERIOR.
4. If there are no areas armed, the keypad displays NONE.