Security Command Executive series, Руководство пользователя

Страница: 13 / 40

10
All/Perimeter System Disarming
Disarming: While the system is armed, you can only enter the
premises through an entry/exit delay door without causing an alarm.
After opening the door, the Security Command keypad sounds a
prewarn tone to remind you to disarm the system. You must disarm
the system before the prewarn tone expires or an alarm on the door
loop will occur.
During the prewarn tone, the keypad displays ENTER CODE:. Enter
your code to disarm the system.
Schedules: If you’ve programmed schedules for your system and a
level 1 or level 2 code is entered outside of a schedule, the keypad
displays INVALID TIME. This lets the user know that they are
disarming outside of their authorized time. If your system is monitored,
an Unauthorized Entry report is sent to the central station.
Alarm Display: After disarming, the keypad displays any loops that
tripped or any transmission problems that occurred during the armed
period. All burglary loops are then disarmed and any bypassed loops
are automatically reset.
Disarmed Message: The keypad displays ALL SYSTEM OFF after
the system disarms.
Central Station Report: A report of the system disarming can be
transmitted to the central station. This is optional and can be
programmed for you at any time.
Arming and Disarming
Disarming an All/Perimeter System
1. During the entry delay time, the keypad displays ENTER CODE:
. Enter your security code number and press COMMAND.
2. The keypad then displays any loops that went into alarm or any
communication problems that occurred during the armed period.
3. The keypad next displays ALL SYSTEM OFF to confirm the
system is disarmed.
Disarming During an Alarm
1. While the alarm bell or siren is sounding, enter your security code
number and press COMMAND. The keypad displays DISARM
SILENCE.
2. Press the SELECT key under DISARM to disarm the system and
silence the alarm.
The keypad next displays ALL SYSTEM OFF to confirm the
system is disarmed.
3. Press the SELECT key under SILENCE to stop the bell or siren
but NOT disarm the system.