Security Command Executive series, Руководство пользователя

Страница: 19 / 40

16
Loop Status
continued
4. Select ARM for a list of loops that are currently armed. You can
scroll through the list by pressing the COMMAND key.
5. Select BYPS for a list of loops that are currently bypassed.
6. Select ALR for a list of loops that have tripped during the current
or previous armed period.
7. Press NBR and LOOP: - will be displayed.
8. At the LOOP: - prompt, enter the loop number you want to check
and press COMMAND. The loop number and name is displayed
followed by its status.
For example, a loop check for loop 1 might be: L1 DOOR - OKAY.
Below is a list of the loop status displays:
-OKAY = the loop is in a normal condition
-BYPAS = the loop is bypassed
-BAD O = the loop is open
-BAD S = the loop is shorted
9. After displaying the loop status, LOOP: - returns for you to enter
another loop number.
User Menu
Bypass Loops
User Code Level: 6 and above.
Function: Allows you to bypass a loop prior to arming.
Bypassing is usually done when a loop cannot be restored to normal.
The system will not respond to any activity on the loop although the
loop name will still appear in the Alarmed Loops list.
A loop can be bypassed only while it’s disarmed. Since fire, panic,
emergency, and supervisory type loops are always armed, they can
never be bypassed.
Bypass Loops can also be used to reset a loop that has been
bypassed and restore it back into the system. This can only be done
while the loop is disarmed.
When Bypass Loops is selected, a report can be transmitted to your
central station. This is optional and can be programmed for you at any
time.
Using the Bypass Loops Function
1. Access the User Menu.
2. Press the COMMAND key until BYPASS LOOPS? displays.
3. Press any of the SELECT keys. The keypad displays LOOP: -
RST BYPS.
4. To Reset, enter the loop number you want to reset and select
RST.
5. To Bypass, enter the loop number you want to bypass and select
BYPS. The loop number automatically disappears and a new
loop number can be entered. Refer back to step 4.