Security Command Executive series, Руководство пользователя

Страница: 11 / 40

8
Area System Disarming
Disarming: While the system is armed, you can only enter the
premises through an entry/exit delay door without causing an alarm.
After opening the door, the Security Command keypad sounds a
prewarn tone to remind you to disarm the system. You must disarm
the system before the prewarn tone expires or an alarm on the door
loop will occur.
During the prewarn tone, the keypad displays ENTER CODE:. Enter
your code to disarm the system. Only those areas assigned to your
code will disarm.
Schedules: If you’ve programmed schedules for your system and a
level 1 or level 2 code is entered outside of a schedule, the keypad
displays INVALID TIME. This lets the user know that they are
disarming outside of their authorized time. If your system is monitored,
an Unauthorized Entry report is sent to the central station.
All Or Selective Disarming: After entering your code number, the
system allows you to disarm either all of the areas to which you have
access or just selected areas. If you choose to disarm all areas, the
system automatically disarms them. If you choose to disarm selected
areas, the names of those areas will be displayed on the keypad.
Alarm Display: After disarming, the keypad displays any loops that
tripped or any transmission problems that occurred during the armed
period. All burglary loops are then disarmed and any bypassed loops
are automatically reset.
Disarmed Message: The keypad displays ALL SYSTEM OFF after
the system disarms.
Arming and Disarming
Central Station Report: A report of the system disarming can be
transmitted to the central station. This is optional and can be
programmed for you at any time.
Disarming an Area System
1. Press the COMMAND key until ARM DISARM is displayed.
During entry delay this process starts at step 3.
2. Select DISARM to disarm areas.
3. The keypad displays ENTER CODE: . Enter your security code
and press COMMAND. The keypad displays ALL? NO YES.
4. Select YES to automatically disarm all the areas authorized for
your security code.
Select NO to disarm only certain areas individually. The keypad
then displays the name of each area authorized for your security
code followed by the NO YES display.
Choose YES to disarm the area displayed.
Choose NO to not disarm and to display the next area.
Note: You can also just press the area numbers you want to disarm
while at the ALL? NO YES display. This changes the display
to AREAS: . The area numbers you select appear in the display.
For example: AREAS: 2 4 . Press COMMAND when done.
5. After all areas have been displayed, any alarms or communication
problems that occurred during the armed period are displayed.
6. If all areas have been disarmed, the keypad next displays ALL
SYSTEM OFF.