Rolling screen installation and operation manual
ENGLISH
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: SLMF
–
Installation Manual rev1 | 20.07.2018
Page 15
PROGRAMMING END S TOPS F ABRI C and MAS K (proc edures already c arried out in fac tory , S HOUL D NOT be perform ed by unauthorised personnel )
Each programming procedure consists of several steps; at the end of each step, the operator has 60 seconds to start the nex t step; this system is devised to prevent the risk of performing operations other
than those desired. Therefore, if the motor does not perform the operation exactly as indicated in the instructions, wait 60 seconds, then exit programming, or cancel the procedure as indicated at specific
point, and start the procedure all over again.
END S TOP MAS K MOVEMENT (S HOUL D NOT be perform ed by unauthorised personnel )
The motor’s settings follow an overwriting logic: therefore, once the e
nd stop positions have been memorised they cannot be cancelled, but only overwritten by following the above-mentioned procedure from
the start.
TO CANCEL THE PROGRAMMI NG I N COURS E
In order to cancel the procedure in course, simultaneously press
◼
and
at any time, until the motor has executed 6 movements.
