Rolling screen installation and operation manual
ENGLISH
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: SLMF
–
Installation Manual rev1 | 20.07.2018
Page 12
07 INSTALLATION INSTRUCTIONS
WARNING:
When installing the screen use plugs and screws suitable for the screen’s weight and for the type of wall or ceiling on whic
h the mount brackets are to be fixed, based on the
following criteria
Screen width view area up to cm
225
250
275
300
325
350
Overall weight
Kg 34
Kg 40
Kg 47
Kg 55
Kg 58
Kg 60
1. Fasten the brackets to the wall or ceiling, respecting the distances
indicated in the figure (the third bracket is present only in versions over 3m
long).
2. Mount the screen by hooking the brackets into the dedicated slots.
3. Tighten the lower screw of the bracket until the case is firmly anchored (it
is not necessary to exert any force).
4.To execute “compulsorily
“the procedures described
to point 2 before using the
screen.
5° operation:
To connect the motors to power
(M1 and M2)
7° operation:
Press the 6 button on the
remote control for open all
fabrics of about 10cm
ATTENTION! After pressing button 6,
verify that the projection fabrics
opened 10cm.
If the projection fabrics do not moved,
do not press any other buttons, but
manually help the lowbar to get out of
the casing (see illustration).
8° operation:
remove all the seafty
accessories applied on the
surface
Now the screen is
ready
