Scientific SM6026, Руководство пользователя

Страница: 22 / 95

User Manual SM6026 22
Operation steps for setting test speed :
1) Move the cursor to SPEED, the following soft keys will be displayed:

FAST
 MED
 SLOW
2) Use above soft keys to set the test speed.
3.1.7 Tools
The test result of SM6026 is displayed as 6 floating-point digits. Decimal point lock function can make
SM6026 output the test result in fixed way. Meanwhile this function can change the displayed count of
test result. This displayed result can be selected to be shown in large character or small character.
Operation steps for tools :
Set the display mode of decimal point in fixed mode according to the following operation steps. Also the
character size of test result can be set.
1) Move the cursor to MEAS RESULT DISP zone, the following soft keys will be displayed:

DECIMAL AUTO
 DECIMAL FIX
 D.P. POS INCR +
 D.P. POS INCR -
2) Press DECIMAL AUTO to reset the decimal position of the primary or the secondary parameter test
result to its default setting.
3) Press DECIMAL FIX to lock the decimal location of primary parameter TEST result.
4) Press D.P. POS INCR + to increase the displayed digit by ten times.
5) Press D.P. POS INCR - to decrease the displayed digit by ten times.
——————————————————————————————————————————————
NOTE: Under the following circumstance, the function of decimal lock will be canceled automatically to
recover to floating decimal point status.
 Test function is changed.

In deviation test, the deviation test mode (ΔABS, Δ%, OFF) is changed.
——————————————————————————————————————————————
3.2 <BIN NO. DISP>
Press [DISP] firstly and then the BIN NO. soft key to enter into <BIN NO. DISP> display page. On this
page, bin NO. is displayed in upper-case character while the test result, in lower-case character.