User Manual SM6026
11
2.0
Panel Controls
2.1 Front Panel Controls
Figure 2-1 Front panel
1) Brand and model
:
Brand and model.
2) [COPY]
:
Copy the currently displayed page to USB memory.
3) [MEAS]
:
Press this key to enter into the corresponding measurement
display page of instrument functions.
4) [SETUP]
:
Press this key to enter into the corresponding measurement setup
page of instrument functions.
5) [SYSTEM]
:
Press this key to enter into the system setup page.
6) Numerical keys
:
These keys are used to input data to the instrument. The key
consists of numerical keys [0] to [9], decimal point [.] and [+/-] key.
7) [ESC]
:
ESCAPE key.
8) [
←
]
:
BACKSPACE key is used delete the last numeric of the input
value.
9) PASS indicator
:
LED indicator shows the test result has passed.
10) FAIL indicator
:
LED indicator shows the test result has failed.
11) [RESET]
:
Press this key, other operation cannot be executed on other
pages.
12) [TRIGGER]
:
When the trigger mode is set to MAN mode, press this key to
trigger the instrument.
13) [ENTER]
:
This key is used to end the input of data, and confirm and save
the data displayed on the inputting line (the bottom line on LCD).
14) Test terminals
:
4-terminal test pair is used to connect 4-terminal test fixture or
cable to measure DUT. The 4 terminals are respectively as
follows: Hcur, Hpot, Lpot and Lcur.
15) Ground terminal
:
The ground terminal is connected with the case of instrument,
which can be used to protect or shield the ground connection.
16) CURSOR
:
This key is used to move the cursor on the LCD displayed page.
When the cursor moves to a zone, the corresponding zone will be
lightened.
17) Soft keys
:
Six soft keys are used to select parameters. The corresponding
function of each soft key has been displayed on its left (the right
part of LCD). The function definition varies with different pages.
18) LOG
:
This key can record the measurement data automatically after
Содержание SM6026
Страница 1: ...User Manual LCR Meter SM6026 ...
