Scientific SM6026, Руководство пользователя

Страница: 16 / 95

User Manual SM6026 16
3.1.1 Test function
In a measurement period, SM6026 can test two parameters for an impedance component: one primary
parameter and one secondary parameter. Parameters that can be tested are as follows:
Primary parameter
 |Z| (Module of impedance)

|Y| (Module of admittance)
 L (Inductance)
 C (Capacitance)
 R (Resistance)
 G (Conductance)
 DCR (DC resistance)

L2A (Primary inductance)
 L2B (Secondary inductance)
Secondary Parameter
 D (Dissipation factor)
 Q (Quality factor)

Rs (Equivalent Series Resistance ESR)
 Rp (Equivalent Parallel Resistance)
 X (Reactance)

B (Admittance)
 θ (Phase Angle)
 N, 1/N (Turn ratio and polarity)

M (Mutual inductance)
 R2 (DC resistance)
Test results of primary and secondary parameters are respectively displayed in two lines in the form of
upper-case characters. The primary parameter displays in the upper line while the secondary parameter
displays in the lower line.
Operation steps for setting test function :
1) Move the cursor to FUNCA zone, the following soft keys will be displayed on the screen.
 Cp—…→
 Cs—…→

Lp—…→
 Ls—…→
 ↓