SciCan STATIM 900J, Руководство оператора, Страница: 28 / 31

STATIM
900J Operator’s Manual
28
7.3 Cycle Printout
Overview
1. Model: STATIM 900J
software: SJ00R604
2. Unit Identifier: autoclave
has been set up as
number 000
3. Cycle counter: the number of
cycles having been run on the
unit = 6
4. Time / Date: 4:10 pm
Dec. 4, 2007
5. Cycle Name: SOLID
INSTRUMENT CYCLE
6. Cycle Name: Cycle name
parameters 134 C for 3.5 min.
7. Cycle clock: starting
at 0:00
8. Warm up complete:
start of the conditioning
phase is 1:35 (see cycle
graph – ‘A’ phase
complete, start of
‘B’ phase)
9. Start Time of Pressurization:
2:40 (start of ‘C’ phase)
10. Start Time of Sterilization:
3:14 (start of ‘D’ phase)
11. Temp. / Press. & Time at start
of sterilization (‘D’ phase).
12- 17 Cycle pararmeters at 30
second intervals.
18. Temp. Press. & Time of end
of sterilization phase (end of D
phase.)
19. Time venting start 6:44 (start
of E phase.)
20. Sterilization was successfully
completed.
7. The Communication Port
1. Statim 900J SJ00R604
2. Unit # : OOO
3. CYCLE NUMBER 00006
4. 16:10 04/12/2007
5. SOLID INSTRUMENTS
6. 134 C for 3.5 min.
7. CYCLE START
0:00
8. CONDITIONING 1:35
9. PRESSURIZING 2:40
10. STERILIZING 3:14
11. 136.5 C 227kPa 3:14
12. 135.7 C 220kPa 3:44
13. 136.4 C 226kP a 4:14
14. 136.5 C 227kPa 4:44
15. 135.9 C 221kPa 5:14
16. 136.4 C 227kPa 5:44
17. 135.9 C 221kPa 6:14
18. 136.4 C 226kPa 6:44
19. VENTING 6:44
20. CYCLE COMPLETE 6:59