SciCan STATIM 900J, Руководство оператора, Страница: 24 / 31

STATIM
900J Operator’s Manual
24
7. The Communication Port
7.1 The RS232
Communication Port
All Statim units that do not have an
internal printer will have an RS232
communication port that will allow you
to connect to an external printer or to a
SciCan Data Logger. For printing, you
will need to purchase a recommended
printer (see list below) from your local
computer or electronics store. For data
storage, you can purchase SciCan’s
USB Data Logger to record and store
cycle information onto a mass storage
device (MSD) such as a USB Flash Drive
or SD memory card.
Printer Model End Of
Line
CR/LF Serial Port
Bitrate Printer user °
character
Epson
TM-U220D (C31C515603) CR/LF 9600 248 [0xF8]
Citizen
IDP-3110-40 RF 120B CR 9600 N/A
Star Micro
SP212FD42-120
CR 9600 210 [0xd2]
Star Micro
SP216FD41-120
CR/LF 9600 210 [0xd2]
Star Micro
SP512MD42-R
CR/LF 9600 210 [0xd2]
SciCan Data Logger End Of Line
CR/LF Serial Port
Bitrate Printer
user °
character
For mass storage device* N/A 9600 32 [0xd2]
* Due to a variety of software programs/viewers that can be used to view the
data files stored on a mass storage device such as a USB memory stick, we
recommend the above settings
.
For your Statim to communicate to a specific device, you must enable this
function through the User Setup menu. Follow the instructions in section 7.2
Installing the SciCan Data Logger below to enable communication to either an
external printer or the SciCan Data Logger.
Figure 5
Data Logger
Printer
OR