SciCan STATIM 900J, Руководство оператора, Страница: 26 / 31

STATIM
900J Operator’s Manual
26
Setting the Serial Port Bitrate to 9600
1. From the User Setup menu, use the Solid Instrument and Hollow or
Wrapped Instrument Cycle buttons to scroll to the Serial Port Bitrate menu
and select it using the Rubber and Plastic Cycle button.
2. From the Serial Port Bitrate menu, use the Solid Instrument or Hollow or
Wrapped Instrument Cycle buttons to scroll down to 9600 and press the
Rubber and Plastic Cycle button to select and return to the User Setup
menu.
Setting the Printer user Character; (example: 134°C)
1. From the User Setup menu, use the Solid Instrument or Hollow or Wrapped
Instrument Cycle buttons to scroll to the Printer user ° char menu and select
it using the Rubber and Plastic Cycle button.
2. From the Printer user ° char menu, using the Solid Instrument cycle button
to increase the displayed value by one, and the Hollow or Wrapped
Instrument Cycle button to increase that value by ten, enter the value 32
[0x20] and press the Rubber and Plastic Cycle button to accept and return
to the User Setup menu.
Save and Exit
A Save and Exit must be performed after the above settings are completed. If
this is not done, the information will revert to its prior settings.
1. From the User Setup menu, use the Solid Instrument or Hollow or Wrapped
Instrument Cycle buttons to scroll to Save and Exit.
2. Select it by pressing the Rubber and Plastic Cycle button.
The LCD will display time
and date information and
a sequence of messages:
If the time and date need to be adjusted, refer to section 3.7, Setting The Time
and Date.
9600 Serial Port Biterate
HH:MM DD/MM/YYYY
"MSD NOT DETECTED"/"INSERT
MSD/FLASH"/"SELECT A CYCLE"
7. The Communication Port
32 [0x20] Printer User º Char
Save and Exit