deltaSchwank
13
Version
002
deltaS
ch
w
ank 19
/18
Tech
ni
cal
sp
eci
fic
ati
on subject to
cha
nge
Condensate drain deltaSchwank
- version aluminium -
For flue gas lengths > 1.5 m [exclusive
chimney] a condensate line must be
laid. In general this applies for types
deltaSchwank 310U and 320U.
For this use a special cap with outlet
spout for T-piece [
outdoor
32 mm] is available in order to
connect a following condensate
drainage.
A flexible stainless steel pipe as
connection is recommended because
higher temperatures in nominal load
operation [200 ° C] can occur at the
connection point.
Drain lines must be laid with a gradient
to discharged inlet point into sewer.
Fig. 10: Condensate drain deltaSchwank
