deltaSchwank
12
Version
001
deltaS
ch
w
ank 411
7 Te
ch
nische
Änderung
en
vo
rbehal
ten
Flexible exhaust system deltaSchwank
[roof terminal]
- version aluminium -
Install stainless steel flexible pipe
without sink.
Connection stainless steel flexible pipe
to aluminium tube must be glued with
heat-resistant sealing material and
locked by means of self-tapping screws.
All socket connections on the exhaust
and incoming air routes must be locked
by means of self-tapping screws.
The 90° elbow at the sucking fan side is to
mount with the opening on the top.
A vertical distance between exhaust
gas outlet and roof terminal outlet of at
least 50cm is mandatory.
For exhaust gas lengths> 1.5 m [without
roof terminal] condensate drainage
must be installed.
This is valid on principle for types
deltaSchwank 310U and 320U.
The following components are required for
mounting the roof terminal aluminum design
[Distance heater- terminal approx. 1.5 m]:
Roof terminal M&G:Article no. 12221770
Testing set C 15-20kW: Article no. 12676660
Testing set C 30-40kW: Article no. 12676750
Please note the safety distance to
flammable materials:
-
single-wall exhaust pipe: 40 mm
-
double
-wall exhaust pipe + wall
terminal: 0 mm
System certification tube heater
deltaSchwank with exhaust line
system MUGRO
CE 0432-CPD-217915, System 0.2 / 0.5
[Muelink&Grol]
The roof terminal is slide in from above
into the roof socket. in from above into
the roof socket. The fixing inside the
building takes place via a clamp to the
building ceiling.
Fig 9: Position of control points [roof terminal], version aluminium
Dimension flat roof sockets
Control points
flat version
high version
Connection stainless flexible
pipe to aluminium
tube
exhaust gas:
stainless flexible pipe with
connecting flange
combustion air:
dS 310 – 320U: aluminium pipe
dS 625 – 1260U: stainless
flexible pipe
