Schwamborn 717005, Перевод оригинального руководства по эксплуатации

Страница: 25 / 64

7 Declaration of Conformity
EN Floor milling machine BEF 320EX / BEF 320VX
25
7 Declaration of Conformity
Schwamborn Gerätebau GmbH
Robert‐Bosch‐Straße 8
D‐73117 Wangen
Germany
We hereby declare that the machine
BEF 320EX / BEF 320VX
comply with the provisions described in
— Directive 2006/42/EC
Machine
— Directive 2004/1 08/EC
Electromagnetic Compatibility
— Directive 2006/95/EC
Low Voltage
The following harmonised standards apply:
— EN 292‐1, EN 292‐2, EN 13857
Safety of Machinery
— EN 60204‐1
Electrical Equipment of Machines
— EN 50081‐2/EN 50082‐2/EN 61000‐6‐2
Electromagnetic Compatibility
It is forbidden to begin operating a modified or retro­
fitted machine before it has been determined that the
modified or retrofitted machine conforms to the EEC
directives.
This declaration is no longer valid if the machine is
modified or retrofitted without our prior consent and
approval.
Wangen, 10/9/2012
Eckart Schwamborn
Managing Director
8 Technical data
BEF 320EX (7.5 kW) BEF 320EX (11 kW) BEF 320VX
Motor type asynchronous rotary current motor single cylinder four‐stroke
motor (HONDA)
Fuel — — Petrol 91/95 ROZ
Tank capacity — — 6,1 litres
Rated power 7,5 kW 11 kW 8,7 kW
Rated voltage 400 V, 3

400 V, 3

—
Rated frequency 50 Hz 50 Hz —
Rated current 14,4 A 21,1 A —
Minimum cross section of
the
connecting cable
(max. 25 m)
5 x 2.5 mm
2
5 x 4.0 mm
2
—
Milling rotor speed 1000 rpm 1000 rpm 1000 rpm
Driving speed
(forwards/backwards) continuously varia­
ble 0 ... 8
m/min continuously varia­
ble 0 ... 8
m/min continuously va­
riable 0 ... 8
m/min
Protection rating IP 54 IP 54 IP 54
Dust extraction

76 mm

76 mm

76 mm
Dimensions (L x W x H)
about
1450 x 1100 x 650 mm 1450 x 1100 x 650 mm 1450 x 1100 x
650
mm
Working width 320 mm 320 mm 320 mm
Edge distance right min. 72 mm min. 72 mm min. 72 mm
Weight about 355 kg about 365 kg about 344 kg
Noise level 98 dB(A) 98 dB(A) 98 dB(A)
Vibration, total value *)
±
3,3 m/s
2
±
3,3 m/s
2
±
3,3 m/s
2
*) Determined under standardised manufacturer operating conditions according to the HARM measuring me­
thod.